Security systems, video recorders, mobile phones, video cameras and cameras.

Improving technical operation of vehicles

The indicator is designed for automated measurement of humidity of the oil, drained off the turbine-type bearing. It can be used for other organic liquids, the dielectric capacity of which is less than 40 relative units.

The system of technical diagnostics of special polar cranes in the nuclear power plants is designed to monitor the condition of steel wire ropes of special polar cranes in the nuclear power plants.

The MFDW (magnetic flow detector of wires) system is designed for nondestructive test of wires according to SR 10-382-00, SR 03-301-99, GP 03-301-99 and etc

The test stand "VYHOD-2" is designed for the cosmonaut and astronaut training at practicing of the airlocking cyclic graph at spacewalk.

The magnetic field strength meter “TIMMAG-4” is designed for measurement of magnetic field strength at three points on the test product surface and for calculating of the field strength on the surface of magnetic material products directly.

The apparatus is designed for diagnostics of the Earth's magnetic field and for the sequential forecasting of the magnetic storm onset 1.5-2 hours prior to, indicating the index of geomagnetic activity.

The instrument “MAGHYST” is designed to determine the characteristics of soft magnetic materials in the ring-shaped and rod-shaped samples and components of electromagnets by measuring the dependences of the flux linkage on Ψ (I) of the current of the corresponding sample at a constant rate of the flux change.

It is designed for application of the current of whatever kind in the network - single phase and three-phase AC with the voltage of 220V, 380V, DC voltage of 110 – 220 (including changing the polarity), dual current type (ie, AC network, having high or low power load, fed from the semiconductor controlled or uncontrolled rectifiers with no use of transformers), as well as in dead networks.

Multiparameter diagnosis of technical condition of mechatronic modules of motion. Short-term and long-term forecasting of the object’s technical state with the specification of time and reasons for refusal.

The drives are designed for installation in rotary support devices and provide turning of antenna’s mirror.

The scanner (SM) is a part of the measuring system controlled by the computer, and is designed to move the plug-in measurement probes in two orthogonal directions within the plane perpendicular to the collimator axis.

Three-axial rotary support device (RSD) is designed to position the antenna devices while studying their characteristics. Rotary support device is operated in stationary conditions in a closed room with air temperature of +10 ° C ... +30 ° C, relative humidity up to 80% at the temperature up to +20 ° C and normal atmospheric pressure.

Dynamic simulator is designed to simulate the evolution of vehicles, for example, air ones, while studying antenna characteristics.

The simulator is designed for dynamic testing of rotary support devices of antenna stations in the ship stations providing angular fluctuations in two orthogonal planes with the given parameters and for controlling the antenna’s spatial position in manual setting modes. Operation of the unit is in a closed room at a humidity of 98% and temperature up to +35 °C.

The unit is a one-axel rotary support mechanism that may be used for scanning and positioning of antenna systems that form part of antenna centre on shipboard.

Automatic recording of numbers and actuation time of emergency shutdown relay, and control of various parameters of technological processes with the accumulation of the information and its transfer to the top level of information-measuring system.

The measurement of vibration parameters of industrial facilities.

Automatic control of the robotic system motion in accordance with a prescribed trajectory.

Study of wooden lamella roof joint mobility.